The output settings window (from an ME442) is shown below. Note that other ME ECU models such as the ME100 or ME221 may have different listings, though the functions work in a similar way.


You can access this window from the IO Setup page (if using a default layout). It is also available under the Tree View>System>Output Settings.


From this window, you can set the Coil Mode / Rest States. Assign Outputs to a particular Function or carry out Output Testing.


The output types consist of Coils, Injectors, PWM, Relay and Others. Only certain functions can be assigned to certain pin types, so this should be conisdered when wiring up a universal ME ECU.