The config or driver. widgets are specific modules to handle bespoke control settings on the ECU, such as engine configuration, boost control settings, idle valve setup, and so on.


To edit a value, either use a drop down box or edit the text directly. Once edited, remember to press the ‘enter’ key. The border of the Config Driver will turn red briefly (to indicate data has been sent to the ECU) then turn green to signify that the ECU has indeed received, and stored the data. The changes will take effect, and be permanently stored to the ECUs Flash memory - meaning a power cycle will not lose these changes.


An example, the Injection Driver, is pictured below:



Note that some settings require a power cycle of the ECU after making changes, the CYCLE POWER indicator will light on the bottom status bar.


You can also import the data from another calibration using the Menu button.