3 Bar MAP Sensor
3 Bar MAP Sensor
£35.00 (£29.17 exc vat)
In stock
In stock
Description
This is a Cosworth style 3-Bar MAP sensor, used for measuring manifold pressure. Capable of reading up to 2-bar (30psi) of boost.
It uses a 3mm barb for the vacuum line fitting, and a 3-pin mini timer connector for electrical connection.
The pin-out is:
VREF (5V)
Ground (Middle Pin)
Signal Out (pin closest to the brass eyelet)
The typical HRT calibration you would use in the ME221/ME442 is pictured below:
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 7 × 7 × 7 cm |
