VR Crank Sensor
Crank Sensor VR (Zetec Fitment)
£29.00 (£24.17 ex VAT)
This is a 2 pin VR sensor suitable to use with any of our engine management products.
It should ideally be used with a 36-1 trigger wheel, and its spacing from the teeth should be around 0.2-0.5mm for best results.
Its polarity of wiring does not usually matter, though check the specific install guide of the ECU you are using.
It uses a 2-pin Mini Timer plug for connection, and is an OEM fitment on Ford Zetec engines.
Dimensions are also shown if you would like to make your own brackets.
|Dimensions||10 × 2 × 2 cm|