ME300 Universal Ignition ECU

///ME300 Universal Ignition ECU

ME300 Universal Ignition ECU

£695.00 (£579.17 exc vat)

In stock

Complete ignition control for 4, 6 or 8 cylinder engines with advanced features.

In stock

SKU: ME300_WIREIN_ECU Categories: ,

Product Description

This is the ME300 Ignition Only ECU for 4,6 or 8 Cylinder Engines.

It comes complete with Plug & Pins or an optional 3m unterminated loom (sold separately).

The item pictured is the ME442 which also has fuel control. The ME300 is the same product, only fuel control is disabled. All other features operate as normal including Wideband (for monitoring purposes).

Full specification is below:

Tuning Software (MEITE)

  • Intuitive, developed with real-world feedback from 100’s of tuners
  • Everything real-time adjustable
  • Diagnostics and analysis functionality
  • Custom layouts, tabs and functions
  • In-built firmware update tool for ease-of-use
  • Custom “part calibration” import – use settings from other maps in a current map
  • Offline Editing of calibrations
  • Real-time tracing
  • Data-logging of all variables and Auto-Tune

Fuelling Monitoring

  • Narrow-band/Wide-band Lambda input with Bosch LSU4.9 wideband lambda controller on-board
  • Flex-Fuel secondary tables

Ignition Control

  • 16×16 32bit Table
  • Closed Loop DSP Windowed Knock Control On-board
  • Battery Voltage Dwell Correction 16×16 Table
  • Individual Cylinder Trimming
  • IAT and Coolant Trim
  • Spark-Scatter Ignition Idle Control
  • Flex-Fuel Control
  • Switchable Ignition Tables

Crank/Cam Triggering

  • VR/Hall/Opto Inputs as required
  • Auto-scaling, Parametric Noise Rejection
  • Range of OEM Patterns Supported

Idle Control

  • PWM based Closed/Open/Manual Diagnostic Modes
  • 4-wire Stepper based idle control
  • Cranking/Return to idle Settings reference Open-Loop table for wide-control
  • DBW Idle Control *where DBW is used
  • AC/Fan Auto-Idle Up Settings
  • PID Based for Accuracy
  • Fuel Modifiers
  • Ignition Spark Scatter
  • Jacked-Throttle Miss-Bang Idle Mode (Group-N ALS)

Knock Control

  • DSP Angular Windowed Knock Control
  • Settable Gains, Offset and Window Duration
  • Step Retard and Fail-Safe

Boost Control

  • Closed/Open Loop Boost Control by 16×16 RPM and Throttle table
  • Boost-by-Gear
  • Switchable Boost Tables
  • Over-Boost Protection
  • Pre-Start Duties
  • Anti-Lag Group-N

Variable Valve Timing

  • Fully Closed Loop PWM (Throttle X RPM table)
  • Dual Cam Support
  • Locked Angle or Locked Duty testing modes
  • Basic On/Off Mode (Honda V-Tec)
  • Supported patterns include MX5 2001-2005 and Ford ST170, Ford Puma 1.7
  • PID Tuning with Oil Temperature triggering & safeties
  • Programmable Rest State & Offset compensation

General Purpose Tables

  • 6x General Purpose Tables
  • Custom Variables and Outputs
  • Modify Fuel, Ignition, Boost and Idle strategies from the GPTs
  • 3D and 2D tables with ability to “chain” tables together for create complex functions

Communications

  • Industry Preferred RS232 for ECU mapping/communication (USB Adaptor available)
  • CAN-Bus on some models
  • USB on some models

Drive-by-Wire 

  • 6.5A Half bridge
  • Closed loop, dual redundant DBW
  • DBW Idle Control functions
  • Software and Hardware fail-safes

Processing Power

  • 180Mhz 32-bit RISC Processor
  • Ignition Accuracy to 0.01 degrees, Fuelling to 0.001mS
  • 32-bit maths and tables (Table entries can have 8 decimal places for very high resolution)
  • ADCs/Analogue data reported to 16-bit accuracy
  • 20,000+ RPM

Analogue/Digital Inputs

  • Configurable “HRT”‘s for every analogue channel – use any sensor. Basemaps pre-set for factory sensors.
  • Wide-band O2 LSU4.9 Controller Built In
  • TPS, IAT, CLT, MAP, Lambda standard inputs
  • Selectable feature for digital/analogue inputs
  • Spare/unused analogue lines can be used for general purpose tables or digital switches

Environmental & Physical

  • Automotive -20 – 85*C
  • Voltage 5.5-28V
  • Operating Current Approx 120mA @ 13v
  • Electrically isolated and protected inputs/outputs
  • 90 Way Automotive Connector
  • IP67 Sealed Alloy Casing

DataLogging

  • 4Gb On-board Data logging – over 2,000 Hours of all variables
  • Unlimited PC based logging via MEITE
  • User settable Triggers and markers

 

Technical Specification

Additional Information

Weight 0.6 kg
Dimensions 40 × 15 × 7 cm