Tel: ‎+44 (0)1373 710 610

NODIZ Pro - Zetec Complete package

Availability: In stock

Regular Price: £349.00

Special Price Excl. Tax: £249.17 Incl. Tax: £299.00

NODIZ Pro - Zetec Complete package is available for purchase in increments of 1

Maximum number of characters: 250

Regular Price: £349.00

Special Price Excl. Tax: £249.17 Incl. Tax: £299.00

NODIZ Zetec System with PnP Loom

More Views


If you have the factory Coil Pack and Crank Sensor on your Zetec, and are using carbs for fueling, then this package is EVERYTHING you need to have it up and running in MINUTES!

Its a fully 3D mappable ignition system that varies the engines ignition advance based on both speed and optionally if required throttle position/manifold pressure. It benefits from inbuilt coil drivers, (so no need for EDIS modules or external ignitors), as well as it also supporting factory trigger wheels as used on various engines such as Vauxhall, Peugeot, Citroen, VW and of course Ford.

If you want to get, for example, your Zetec/XE/Duratec etc on Webers/Bike Carbs up and running, making excellent power using a preloaded map developed by us, with minimal wiring fuss (just click on the connectors to your factory crank sensor and coil pack), then the NODIZ Pro is for you - you can be up and running in minutes...

The units arrive with a fully terminated loom to suit the engine it has been configured for (ZETEC in this case - please see the images to confirm they match your engine), as well as loaded with an optimised basemap that has been developed in house on our L&S engine dynamometer and rolling road tuned our Dyno-Dynamics rolling road. A dyno graph is also presented, so you can see what to expect with correct fuelling.

If you would like to see how quickly your engine can be up and running, check out this example on a customers track car running a Ford Zetec.

A recap of the NODIZ Pro’s features:

  • 3D Mappable Ignition Controller with Inbuilt Coil Drivers - No EDIS Module or other parts required.

  • Fully terminated loom to suit the coil pack and crank sensor of your engine - click on and start!

  • Dyno optimised preloaded ignition map - excellent power results, safe and reliable.

  • Soft & Hard Cut Limiters - keep the engine safe at high rpms.

  • Launch Control - for perfect launches every time. Customer Video

  • Programmable Outputs - For Shift Lights/VTEC/VVT/Fans etc

  • 12V Tachometer Output - suits most OEM dashboards.

  • Splash-Proof and small form factor - mount easily in the engine bay.

  • Custom Tunable with the free EZ-Tune Software - Custom mapping if you want it.

  • Bluetooth™ - Use the included USB Dongle or use the free dash App for Android.

What you will receive...

  • Brand new NODIZ Pro Ignition System with in-house Dyno optimised preloaded ignition map.

  • Wiring Loom pre-made and fitted with crank sensor and coil pack connector, power and ground eyelets and flying leads for TPS/MAP sensor. (Check Images to Ensure correct plugs).

  • Spare Pins for the other features such as shift light, launch control, tacho, etc

  • Bluetooth™USB Dongle.

  • Stickers

Other Available Configurations

The following are the configurations we have developed custom maps for and proven in-house to give excellent, repeatable results. The images are of the loom & parts you will actually receive for this listing - please use this to confirm the connectors. Incorrect connectors are not covered by our return policy - so if in doubt check, and ask before ordering. Please see our other listings for the other versions.

  • Ford Zetec/Duratec/ST/Pinto/Crossflow

  • VW 8v/16v

  • Vauxhall C20XE, 8V, Z16XEV

  • Peugeot/Citroen TU5, 205GTI, Mi16, 1600 8V, VTS/VTR, 1400 Rallye

  • BMW 118IS

  • Renault 5 GTT

  • Mini A Series 1098/1275

Further Technical Information:

In addition to the above most direct and simple installation, the NODIZ Pro™ also features the following:

  • 16 Load by 16 Speed Sites, with full 3D interpolation and user definable Speeds/Loads.

  • User settable RPM Soft and Hard Cut Rev Limiters.

  • In-built coil drivers, no need for EDIS or other modules.

  • Cranking based advance angle to help start high compression engines.

  • A programmable Shift Light output.

  • 12v Tachometer Output.

  • Launch Control ::

  • A programmable output based on either RPM (i.e. V-TEC control), coolant temperature (i.e. Fan Control) or Intake temperature (i.e. Water Injection control).

  • Bluetooth™ Communication (dongle provided) and apps currently being developed to allow tuning with your mobile, as well as GPS and video data-logging.

Click here for videos of the NODIZ EZ-Tune Software and a look at the NODIZ itself...

Digital Dash for Android

Also, use your android phone or tablet for a fully featured digital dashboard. Android dashboard software is available from the Google Play store, free of charge! An example of it running on an Android HTC phone is shown in the pictures..

Feature Comparison

The following table shows the differences between the NODIZ Pro, Micro and the Megajolt system.





3D Maps




Map Size




EDIS Needed?



YES (Cost £50+)

Soft/Hard Cut Limiters



Soft Only

Non Ford Trigger Wheels Supported

YES - 36-1 or 60-2
(Vauxhall, VW, Pug)

YES -  36-1 or 60-2 (Vauxhall, VW, Pug)

or fit extra trigger wheel

Adjustable Offset

+/- 50 Degrees


+/- 5 Degrees

Launch Control




Bluetooth/Android Dash




Custom Mappable


NOT NEEDED (but tuning centre can remap if required.)



SEMI-Terminated or FULLY Terminated Option

Fully Terminated

Pins + Plug


£269inc (NODIZ Pro Module with basic loom)

~£325 with TERMINATED loom.


£199 for the Megajolt + EDIS Module (approx £50) and if used on a non-Ford Engine +£££ for trigger wheel, crank sensor, fitting etc


Video Guide:


Free Shipping No

Write Your Own Review

You're reviewing: NODIZ Pro - Zetec Complete package