Apex PDM Landing

Drag and drop circuit building. Complex logic, made easy.

The same workflow from a four-output build to a full BCM replacement — logic you can read at a glance, even when it isn't simple.

InputSwitch / CANA press, a sensor, a message your ECU already broadcasts.

LogicTimer + conditionThresholds, math, overrides — built by dragging, not coding.

OutputControlled circuitFused, monitored, and documented automatically.

Build any circuit on one canvas — a single switch to a full vehicle's logic, one workflow.
Circuit wizards for common patterns — cooling fans, fuel pumps, headlight and wiper logic in a couple of clicks.
Math & logic on any signal — thresholds, comparisons, arithmetic. Click-and-drag, no code.

"It really is a breath of fresh air using it. I don't feel like I need an engineering degree to get through it."
— Taylor Ivey, Triveyal Enterprises

CAN and existing hardware just works.

Interact with any CAN-based device directly, use the messages anywhere on the canvas, and layer Apex onto a build you've already dialed in.

Load the DBC, use the messages anywhere.

Triggers, math, alarms and custom frames — all driven by what your ECU already broadcasts.

Custom CAN frames, graphically.

Construct any message to send out, with click-and-drag math, no manual required.

Layer it onto the build you have.

Add Apex for the logic your current stack can't express, without ripping out working hardware.

What early users tell us.

"A huge step up from our current system in terms of ease of use, versatility and quality."

"The software is a level above."

— Blake McBride

"A task that took me <1 minute in the Apex software would have been multiple rounds of reading the manual + trial/error in other units."

— Blake McBride

"I've showed it to a few other people that are not so technically inclined and they picked it up pretty easily with the drag and drop connections, and making circuits."

— Taylor Ivey, Triveyal Enterprises

"For me personally, the ability to just pop in a DBC file for canbus and then call those messages so easily in the rest of the software, that is the best."

— Taylor Ivey, Triveyal Enterprises

"Really a game-changer!"

Ready when you are.

Tell us about your build — chassis, ECU, current PDM, and what your existing stack can't express. We'll help you spec the right Apex and get you configured.

Curious to try the software first? Download the Apex app and explore the visual canvas, CAN tools and circuit builders yourself — no hardware required.

Download the software

01 / New to PDMs

What is a PDM?

A Power Distribution Module is a modern replacement for fuse boxes and relay banks. It powers, protects and controls your vehicle’s electrical circuits from one central unit - making the wiring cleaner, easier to diagnose and easier to change later.

Replaces fuses & relaysControl multiple circuits without building everything around separate fuse holders and relay banks.

Protects each circuitElectronic protection helps prevent faults without relying on replaceable fuses.

Simplifies wiringReduce clutter, duplicated feeds and messy add-ons for a cleaner install.

Makes faults easier to findSee what each circuit is doing and diagnose electrical issues faster.

02 / THE SOFTWARE-FIRST PDM

Build the logic your car actually needs.

Apex turns vehicle power control into a visual workspace. Build simple circuits in minutes, then add conditions, timers, overrides and CAN-based behaviour as your setup grows — without turning every change into a wiring job.

Visual circuit buildingCreate circuits using clear blocks for inputs, logic and outputs.

Flexible control logicCombine switches, timers, conditions, overrides and CAN data.

CANbus integrationUse data from ECUs, dashboards and keypads to control outputs with less wiring.

View technical specs →

03 / Fast Recommendation

Four questions.One recommended system.

Answer four quick questions and the configurator will recommend the right PDM, harness, controls and power connection.

I know what I need - go to shop

04 / DIRECT TO RANGE

Ready to order? Go straight to the Apex PDM range.

For installers and customers who already know what they need, this route removes the explanation and takes them straight to the product range.

Apex 16Ideal for focused builds with a lower circuit count.

Apex 24More outputs and headroom for bigger or future-proofed builds.

Harness optionsMake installation simpler for blank-canvas builds.

Shop Apex PDM Range →

Everything you'd expect from a PDM. Done right.

Drag and drop circuit building. Complex logic, made easy.

Replaces your fuse box, relay bank, and simplifies your wiring.

Less wiring. More control.

Faster fault-finding.

Built for modern electronics.

Harness options available.

CAN and existing hardware just works.

Load the DBC, use the messages anywhere.

Custom CAN frames, graphically.

Layer it onto the build you have.

What early users tell us.

Ready when you are.

Most wiring systems are stuck in the past.

What is a PDM?

Build the logic your car actually needs.

Four questions.One recommended system.

Ready to order? Go straight to the Apex PDM range.

Interested in becoming a partner?

IGNITION-ONLY ECU's

Support for 4 Cylinders

YES

YES

Support for 6/8 Cylinders

NO

YES

Mappable ignition

YES

YES

Premade harnesses for different engines

YES

YES

Uses our free MEITE tuning software

YES

YES

VVT Control

NO

YES

PLUG-IN ECU's

Factory ECU replacement

YES

YES

Boost Control

YES

YES

VVT control

YES

YES

CAN bus

YES

YES

Knock control

YES

YES

Flex Fuel

YES

YES

Onboard MAP sensor

YES

YES

Onboard logging

NO

YES

Onboard wideband & sensor

NO

YES

Exhaust Gas temp input

NO

YES

Wire-In ECU's

4 Cylinders fully sequential

YES

YES

YES

6 Cylinders fully sequential

NO

YES

YES

8 Cylinders fully sequential