+44 (0)1373 710 610

support@motorsport-electronics.co.uk

+44 (0)1373 710 610

Block

ME221 ECU and Apex 24 Bundle

Sale!

ME221 ECU and Apex 24 Bundle

Price range: £1,333.80 through £1,712.25

Combining our ME221 ECU and Apex 24 PDM (and a cheeky 10% discount) into one amazing package to create the easiest way to wire up your entire vehicle.

A complete Vehicle Management Solution to wire your entire car, the ME221 for engine management and the Apex 24 for the rest of the car.

The ME221 Gen 2 is a wire-in ECU for four-cylinder fuel and ignition control. It provides VE-based fuelling, closed-loop boost control, built-in wideband lambda control, CAN communication, data logging and VVT control. This ECU can be combined with a Plug and Pin kit, Unterminated Harness or a Pre-Terminated Harness to suit your application.

The Apex 24 PDM is a high-capacity power distribution module designed for demanding motorsport, track and road vehicle builds that require serious electrical control without unnecessary complexity. Replacing conventional fuses and relays with intelligent solid-state power management, the Apex 24 gives you a cleaner install, better system protection, and far more flexibility in how each circuit is controlled. The unit provides 24 outputs with a 220A continuous output capability, made up of 8 x 7A outputs and 16 x 15A outputs. It also includes 16 configurable analogue or digital inputs with selectable pull-ups, allowing easy integration of switches, sensors and triggers throughout the vehicle. Multiple outputs can be combined for higher-current devices where required. Designed to suit both competition and road-based applications, the Apex 24 includes onboard logging, dual CANbus, an always-alive mode for essential vehicle functions, and a dedicated braked wiper output. Main power connection is via M6 power stud or Radlok, while Ampseal connectors make pin service and depinning straightforward. The Radlok version is only available by purchasing the associated Radlok Connector - the M6 Stud/Radlok is integral to the PDM and it cannot be changed later.

Start up support for both systems is included with this package.

Additional information

ECU Harness Option

Plug and Pins, Unterminated Harness, Ford Duratec, Ford ST170, Ford Zetec, Vauxhall C20XE/LET, VW ABF

PDM Harness Option

Plug and Pins, Pre-wired Harness

ME221 Specification

Fuelling Control

  • Configurable Load/RPM BINS 16×16, 32 bit floating point Tables
  • Multiple Fuel Tables
  • Injection Angle
  • Priming Pulse Settings and Crank Pulse Settings
  • Cranking Enrichment
  • After-Start Enrichment and ASE Time Decay
  • Warm-Up Enrichment
  • Acceleration Enrichement TPS/MAP based with Coolant Modifier
  • IAT Correction Table
  • Idle Trims
  • 16×16 AFR Target Table factored into VE Equation
  • Speed-Density/Alpha-N with optional Blending
  • Injector Voltage Offset Table
  • Overrun Fuel Cut
  • Closed Loop Narrow-band/Wide-band Lambda control with Bosch LSU4.9 Controller On-Board
  • Flex-Fuel secondary tables

Ignition Control

  • 16×16 32bit Table
  • Closed Loop DSP Windowed Knock Control On-board
  • Battery Voltage Dwell Correction 16×16 Table
  • Individual Cylinder Trimming
  • IAT and Coolant Trim
  • Spark-Scatter Ignition Idle Control
  • Flex-Fuel Control
  • Switchable Ignition Tables

Crank/Cam Triggering

  • VR/Hall/Opto Inputs as required
  • Auto-scaling, Parametric Noise Rejection
  • Multiple Patterns Supported

Idle Control

  • PWM based Closed/Open/Manual Diagnostic Modes
  • 4-wire Stepper based idle control
  • Cranking/Return to idle Settings reference Open-Loop table for wide-control
  • DBW Idle Control *where DBW is used
  • AC/Fan Auto-Idle Up Settings
  • PID Based for Accuracy
  • Fuel Modifiers
  • Ignition Spark Scatter
  • Jacked-Throttle Miss-Bang Idle Mode (Group-N ALS)

Knock Control

  • DSP Angular Windowed Knock Control
  • Settable Gains, Offset and Window Duration
  • Step Retard and Fail-Safe

Boost Control

  • Closed/Open Loop Boost Control by 16×16 RPM and Throttle table
  • Boost-by-Gear
  • Switchable Boost Tables
  • Over-Boost Protection
  • Pre-Start Duties
  • Anti-Lag Group-N

Variable Valve Timing

  • Fully Closed Loop PWM (Throttle X RPM table)
  • Dual Cam Support
  • Locked Angle or Locked Duty testing modes
  • On/Off Mode with multiple switch points (Honda VTEC)
  • Supported patterns include MX5 2001-2005 and Ford ST170, Ford Puma 1.7
  • PID Tuning with Oil Temperature triggering & safeties
  • Programmable Rest State & Offset compensation

General Purpose Tables

  • 6x General Purpose Tables
  • Custom Variables and Outputs
  • Modify Fuel, Ignition, Boost and Idle strategies from the GPTs
  • 3D and 2D tables with ability to “chain” tables together for create complex functions

Communications

  • Industry Preferred RS232 for ECU mapping/communication (USB Adaptor available)
  • CAN-Bus on some models
  • USB on some models

Processing Power

  • 600Mhz 32-bit RISC Processor
  • Ignition Accuracy to 0.01 degrees, Fuelling to 0.001mS
  • 32-bit maths and tables (Table entries can have 8 decimal places for very high resolution)
  • ADCs/Analogue data reported to 16-bit accuracy
  • 20,000+ RPM

Analogue/Digital Inputs

  • Configurable “HRT”‘s for every analogue channel – use any sensor. Basemaps pre-set for factory sensors.
  • Wide-band O2 LSU4.9 Controller Built In
  • TPS, IAT, CLT, MAP, Lambda standard inputs
  • Selectable feature for digital/analogue inputs
  • Spare/unused analogue lines can be used for general purpose tables or digital switches

Environmental & Physical

  • Automotive -20 – 85*C
  • Voltage 5.5-28V
  • Operating Current Approx 120mA @ 13v
  • Electrically isolated and protected inputs/outputs
  • 90 Way Automotive Connector
  • IP67 Sealed Alloy Casing

DataLogging

  • Unlimited PC based logging via MEITE
  • User settable Triggers and markers

Apex 24 Specification

Hardware

  • Billet Aluminium case
  • 16 Inputs
  • 24 Outputs (16x 15A, 8x 7A)
  • SUPERSEAL Connectors and Terminals

Software

  • Circuit Builders
    • Simple Switched Circuit
    • Analog Triggered Switch
    • Blinker Circuit
    • Fuel Pump Circuit
    • Wipers Circuit
  • Logic Objects
  • Maths Objects
  • Bespoke Modules
    • Wipers
    • Blinker
    • Lighting
    • Timer
    • Counter
    • Transfer Functions
    • Hysteresis
    • Level Switch
    • Delay
    • Multiplexer
    • State Decoder
    • PID
    • Bi-Directional Motor
  • Onboard datalogging
  • Real time data view
  • CANbus keypad integration
  • Printable Set-up sheet generator

Communications

  • 2x fully customisable, 2-way CANbus
  • USB-C (for bench configuration)

Whats in the Box?

  • ME221 ECU
    • Terminated Engine harness (if applicable)
    • 20 spare Terminals
    • Pinout Sheet
  • Apex-24 PDM
    • Apex PDM Connector Kit/Harness (as applicable)
    • Spare terminals
    • USB-C Cable
    • USB-C Dust Cap
    • M5 Cap Head Mounting Bolts
    • Quick start Guide
    • Pinout Sheet

MOTORSPORT ELECTRONICS

GET 5% OFF

Your next order over £800.

Join our mailing list for the latest news, offers, deals and product updates. Confirm your email, then we’ll email your 5% code.

Join the Motorsport Electronics mailing list

Read our privacy policy.

Orders over £800 excluding delivery. One use per customer. Cannot be combined with other discount codes.

Interested in becoming a partner?

IGNITION-ONLY ECU's

Nodiz Gen-X

ME100 Gen-X

Support for 4 Cylinders

Supports up to a 4-cylinder engine with a wasted spark coil pack

R

YES

R

YES

Support for 6/8 Cylinders

Supports up to a 8-cylinder engine in wasted spark only

R

NO

R

YES

Mappable ignition

Live programmable ignition table for optimising ignition timing

R

YES

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines

R

YES

R

YES

Uses our free MEITE tuning software

Uses our advanced MEITE tuning software available from the website for Windows 7 or above

R

YES

R

YES

VVT Control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

NO

R

YES

PLUG-IN ECU's

ME221

ME442

Factory ECU replacement

Straight replacement for the factory ECU, plugs into the original engine harness

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

Flex Fuel

Can interpret a signal from a fuel sensor and alter the fuel delivery accordingly

R

YES

R

YES

Onboard MAP sensor

Manifold absolute pressure sensor fitted on the ECU

R

YES

R

YES

Onboard logging

SD Card slot used to record engine data used for diagnosis

R

NO

R

YES

Onboard wideband & sensor

Wideband integrated into the ECU. Sensor and cable included in the box

R

NO

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

Wire-In ECU's

ME221

ME360

ME442

4 Cylinders fully sequential

Supports up to a 4-cylinder engine with a wasted spark coil pack or coil-on-plug

R

YES

R

YES

R

YES

6 Cylinders fully sequential

Supports up to a 6-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

R

YES

R

YES

8 Cylinders fully sequential

Supports up to a 8-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

Q

NO

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines rather than wiring up your own

R

YES

R

YES

R

YES

Coil on plug support

Suitable for individual coil-on-plug ignition or wasted spark ignition

R

YES

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

R

YES

Onboard wideband lambda

Can interpret a signal from a LSU4.9 wideband lambda sensor to monitor air/fuel mixture for engine protection or calibration

R

YES

R

YES

R

YES

Onboard data logging

8GB SD card fitted to record engine data used for diagnostics or calibration review

R

YES

R

YES

R

YES

Drive-By-Wire Throttle

Support for electronic throttles (e-throttle/DBW)

R

NO

R

YES

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

R

YES

GUIDE TO PLUG-IN ECUS

GUIDE TO ECU TYPES
GUIDE TO IGNITION ONLY ECUS
GUIDE TO ECU TYPES
 

GUIDE TO WIRE-IN ECUS

GUIDE TO ECU TYPES