ME221 ECU and Apex 16 Bundle
Price range: £1,091.88 through £1,701.90
Combining our ME221 ECU and Apex 16 PDM (and a cheeky 10% discount) into one amazing package to create the easiest way to wire up your entire vehicle.
A complete Vehicle Management Solution to wire your entire car, the ME221 for engine management and the Apex 16 for the rest of the car.
The ME221 Gen 2 is a wire-in ECU for four-cylinder fuel and ignition control. It provides VE-based fuelling, closed-loop boost control, built-in wideband lambda control, CAN communication, data logging and VVT control. This ECU can be combined with a Plug and Pin kit, Unterminated Harness or a Pre-Terminated Harness to suit your application.
The Apex 16 PDM is a compact, high-capability power distribution module designed for race, track and road vehicle applications where reliability, flexibility and ease of setup matter. Built to simplify modern vehicle wiring, the Apex 16 replaces traditional fuses and relays with solid-state power control, while giving you far greater visibility and flexibility over how your electrical system works. The unit features 16 outputs, with a 220A continuous output capability, made up of 4 x 7A outputs and 12 x 15A outputs, along with 16 configurable analogue or digital inputs with selectable pull-ups. Outputs can be combined for higher-current applications where required, making the system suitable for everything from lighting and pumps to more demanding vehicle functions. The Apex 16 also includes onboard logging, dual CANbus, an always-alive mode for basic road vehicle functions, and a dedicated braked wiper output for more complete road-going installations. Main power connection is via M6 power stud or Radlok, and Ampseal connectors are used for easy depinning and serviceability. The Radlok version is only available by purchasing the associated Radlok Connector - the M6/Radlok is integral to the PDM and it cannot be changed later.
Start up support for both systems is included with this package.
Additional information
| ECU Harness Option | Plug and Pins, Unterminated Harness, Ford Duratec, Ford ST170, Ford Zetec, Vauxhall C20XE/LET, VW ABF |
|---|---|
| PDM Harness Option | Plug and Pins, Pre-wired Harness |
ME221 Specification
Fuelling Control
- Configurable Load/RPM BINS 16×16, 32 bit floating point Tables
- Multiple Fuel Tables
- Injection Angle
- Priming Pulse Settings and Crank Pulse Settings
- Cranking Enrichment
- After-Start Enrichment and ASE Time Decay
- Warm-Up Enrichment
- Acceleration Enrichement TPS/MAP based with Coolant Modifier
- IAT Correction Table
- Idle Trims
- 16×16 AFR Target Table factored into VE Equation
- Speed-Density/Alpha-N with optional Blending
- Injector Voltage Offset Table
- Overrun Fuel Cut
- Closed Loop Narrow-band/Wide-band Lambda control with Bosch LSU4.9 Controller On-Board
- Flex-Fuel secondary tables
Ignition Control
- 16×16 32bit Table
- Closed Loop DSP Windowed Knock Control On-board
- Battery Voltage Dwell Correction 16×16 Table
- Individual Cylinder Trimming
- IAT and Coolant Trim
- Spark-Scatter Ignition Idle Control
- Flex-Fuel Control
- Switchable Ignition Tables
Crank/Cam Triggering
- VR/Hall/Opto Inputs as required
- Auto-scaling, Parametric Noise Rejection
- Multiple Patterns Supported
Idle Control
- PWM based Closed/Open/Manual Diagnostic Modes
- 4-wire Stepper based idle control
- Cranking/Return to idle Settings reference Open-Loop table for wide-control
- DBW Idle Control *where DBW is used
- AC/Fan Auto-Idle Up Settings
- PID Based for Accuracy
- Fuel Modifiers
- Ignition Spark Scatter
- Jacked-Throttle Miss-Bang Idle Mode (Group-N ALS)
Knock Control
- DSP Angular Windowed Knock Control
- Settable Gains, Offset and Window Duration
- Step Retard and Fail-Safe
Boost Control
- Closed/Open Loop Boost Control by 16×16 RPM and Throttle table
- Boost-by-Gear
- Switchable Boost Tables
- Over-Boost Protection
- Pre-Start Duties
- Anti-Lag Group-N
Variable Valve Timing
- Fully Closed Loop PWM (Throttle X RPM table)
- Dual Cam Support
- Locked Angle or Locked Duty testing modes
- On/Off Mode with multiple switch points (Honda VTEC)
- Supported patterns include MX5 2001-2005 and Ford ST170, Ford Puma 1.7
- PID Tuning with Oil Temperature triggering & safeties
- Programmable Rest State & Offset compensation
General Purpose Tables
- 6x General Purpose Tables
- Custom Variables and Outputs
- Modify Fuel, Ignition, Boost and Idle strategies from the GPTs
- 3D and 2D tables with ability to “chain” tables together for create complex functions
Communications
- Industry Preferred RS232 for ECU mapping/communication (USB Adaptor available)
- CAN-Bus on some models
- USB on some models
Processing Power
- 600Mhz 32-bit RISC Processor
- Ignition Accuracy to 0.01 degrees, Fuelling to 0.001mS
- 32-bit maths and tables (Table entries can have 8 decimal places for very high resolution)
- ADCs/Analogue data reported to 16-bit accuracy
- 20,000+ RPM
Analogue/Digital Inputs
- Configurable “HRT”‘s for every analogue channel – use any sensor. Basemaps pre-set for factory sensors.
- Wide-band O2 LSU4.9 Controller Built In
- TPS, IAT, CLT, MAP, Lambda standard inputs
- Selectable feature for digital/analogue inputs
- Spare/unused analogue lines can be used for general purpose tables or digital switches
Environmental & Physical
- Automotive -20 – 85*C
- Voltage 5.5-28V
- Operating Current Approx 120mA @ 13v
- Electrically isolated and protected inputs/outputs
- 90 Way Automotive Connector
- IP67 Sealed Alloy Casing
DataLogging
- Unlimited PC based logging via MEITE
- User settable Triggers and markers
Apex 16 Specification
Hardware
- Billet Aluminium case
- 16 Inputs
- 24 Outputs (16x 15A, 8x 7A)
- SUPERSEAL Connectors and Terminals
Software
- Circuit Builders
- Simple Switched Circuit
- Analog Triggered Switch
- Blinker Circuit
- Fuel Pump Circuit
- Wipers Circuit
- Logic Objects
- Maths Objects
- Bespoke Modules
- Wipers
- Blinker
- Lighting
- Timer
- Counter
- Transfer Functions
- Hysteresis
- Level Switch
- Delay
- Multiplexer
- State Decoder
- PID
- Bi-Directional Motor
- Onboard datalogging
- Real time data view
- CANbus keypad integration
- Printable Set-up sheet generator
Communications
- 2x fully customisable, 2-way CANbus
- USB-C (for bench configuration)
Whats in the Box?
- ME221 ECU
- Terminated Engine harness (if applicable)
- 20 spare Terminals
- Pinout Sheet
- Apex 16 PDM
- Apex PDM Connector Kit/Harness (as applicable)
- Spare terminals
- USB-C Cable
- USB-C Dust Cap
- M5 Cap Head Mounting Bolts
- Quick start Guide
- Pinout Sheet











