+44 (0)1373 710 610

support@motorsport-electronics.co.uk

+44 (0)1373 710 610

Block

ME221/ME360 terminated Vauxhall C20XE/LET harness


WhatsApp

ME221/ME360 terminated Vauxhall C20XE/LET harness
ME221/ME360 terminated Vauxhall C20XE/LET harness - Image 2
ME221/ME360 terminated Vauxhall C20XE/LET harness - Image 3

ME221/ME360 terminated Vauxhall C20XE/LET harness

£450.00 (£375.00 ex VAT)

Need a replacement wiring harness to suit our Gen2 ME221, ME360 or ME442? Checkout this terminated wiring harness.

In stock

Need anything else while you are here?

Pierburg_Boost_Control_Solenoid_51729jpeg

Electronic Boost Control kit

No need for an old-school bleed screw! Let your new ECU take control of the boost with this electronic boost control solenoid and make use of boost-by-gear and rolling boost launch control.

Powertune 1

Powertune Digital display V5

Looking for the best value CAN display on the market to replace your factory clocks? Look no further than the Powertune V5!

IAT

Inlet Air Temperature Sensor

Give your ECU the critical info it needs with this Bosch/GM inlet air temperature sensor

This represents a comprehensive plug-and-play wiring harness designed for the ME221, ME360 and ME442 Gen-2 system, specifically tailored for the Vauxhall C20XE/LET engine.

The harness is meticulously enclosed in protective sleeves, complete with clear labelling, and incorporates connectors that adhere to the factory specifications. Each wiring assembly is precision-crimped by automated machinery, undergoing rigorous tension and electrical assessments to ensure a seamless and reliable performance experience.

The inclusion of PVC sleeving and distinctive yellow heat shrink labels contributes to a straightforward installation process, facilitating ease and convenience.

 

Additional information

Weight 1 kg
Dimensions 40 × 25 × 12 cm

What's in the box?

  • Wiring harness
  • 20x spare terminals

Related products

Interested in becoming a partner?

IGNITION-ONLY ECU's

Nodiz Gen-X

ME100 Gen-X

Support for 4 Cylinders

Supports up to a 4-cylinder engine with a wasted spark coil pack

R

YES

R

YES

Support for 6/8 Cylinders

Supports up to a 8-cylinder engine in wasted spark only

R

NO

R

YES

Mappable ignition

Live programmable ignition table for optimising ignition timing

R

YES

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines

R

YES

R

YES

Uses our free MEITE tuning software

Uses our advanced MEITE tuning software available from the website for Windows 7 or above

R

YES

R

YES

VVT Control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

NO

R

YES

PLUG-IN ECU's

ME221

ME442

Factory ECU replacement

Straight replacement for the factory ECU, plugs into the original engine harness

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

Flex Fuel

Can interpret a signal from a fuel sensor and alter the fuel delivery accordingly

R

YES

R

YES

Onboard MAP sensor

Manifold absolute pressure sensor fitted on the ECU

R

YES

R

YES

Onboard logging

SD Card slot used to record engine data used for diagnosis

R

NO

R

YES

Onboard wideband & sensor

Wideband integrated into the ECU. Sensor and cable included in the box

R

NO

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

Wire-In ECU's

ME221

ME360

ME442

4 Cylinders fully sequential

Supports up to a 4-cylinder engine with a wasted spark coil pack or coil-on-plug

R

YES

R

YES

R

YES

6 Cylinders fully sequential

Supports up to a 6-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

R

YES

R

YES

8 Cylinders fully sequential

Supports up to a 8-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

Q

NO

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines rather than wiring up your own

R

YES

R

YES

R

YES

Coil on plug support

Suitable for individual coil-on-plug ignition or wasted spark ignition

R

YES

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

R

YES

Onboard wideband lambda

Can interpret a signal from a LSU4.9 wideband lambda sensor to monitor air/fuel mixture for engine protection or calibration

R

YES

R

YES

R

YES

Onboard data logging

8GB SD card fitted to record engine data used for diagnostics or calibration review

R

YES

R

YES

R

YES

Drive-By-Wire Throttle

Support for electronic throttles (e-throttle/DBW)

R

NO

R

YES

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

R

YES

GUIDE TO PLUG-IN ECUS

GUIDE TO ECU TYPES
GUIDE TO IGNITION ONLY ECUS
GUIDE TO ECU TYPES
 

GUIDE TO WIRE-IN ECUS

GUIDE TO ECU TYPES