ME442 Plug-in for Glanza EP91
£895.00 (£745.83 ex VAT)
ME442 plug-in engine-management ECU for the Glanza EP91. Uses the vehicle’s existing ECU connection for a tidy installation. It includes a Bosch LSU 4.9 wideband sensor and connection cable. Check your original ECU and vehicle specification against the fitment guide before ordering.
In stock (can be backordered)
You may also like…
ME442 plug-in engine-management ECU for the Glanza EP91. It includes a Bosch LSU 4.9 wideband sensor and connection cable.
The ECU is designed to use the factory ECU connector and casing. The existing wiring and sensors are retained where supported; installation and a suitable calibration are still required. A MAP vacuum hose may need to be routed to the intake manifold; check the installation guide.
Check your original ECU and vehicle specification against the fitment guide before ordering.
- On-board Bosch Wideband Lambda O2 Controller
- On-board Real-Time-Clock and SD Card Data Logging
- Drive-by-Wire Support (some models, please enquire if needed)
- CAN Bus for external dashboards and expandability
The core has as standard:
- Uses the ME221 ECU Core (NXP Automotive Processing Power)
- Supports factory sensors.
- Plug-in: Supports both switched TPS and linear TPS conversions.
- 16×16 Fuel and Ignition Tables (with dual table switching)
- VE based fuelling algorithm.
- Run any type of high impedance injectors.
- DSP Knock Control
- In-built 60psi MAP sensor
- Closed Loop Boost, Lambda and Idle Control
- Launch Control
- Fully Sequential on 1.8 version
- Firmware updates available
- Uses the powerful MEITE tuning studio.
- An open approach to firmware/software features.
- Supplied with rolling road certified and developed basemaps for either turbo or NA setups.
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 40 × 25 × 12 cm |
Key Features
- VE Based fuelling algorithm (MAF-less)
- Supports all OEM Sensors/Dash/AC etc
- Boost Control
- OEM Idle Control
- High Accuracy
- COP Support
- USB Connectivity
- Switchable Maps
- VVT & DSP Knock Control
- Configurable IO with Auxillary Inputs/Outputs
- Advanced Motorsport Features
- Powerful Tuning Suite
- On-board Bosch Wideband Lambda O2 Controller
- On-board Real-Time-Clock and SD Card Data Logging
- Drive-by-Wire Support (some models, please enquire if needed)
- CAN Bus for external dashboards and expandability
What's in the box
- ME442 ECU
- Sticker
- USB Cable
- Bosch LSU4.9 Wideband sensor and integration harness
Manuals
Click below to open the manuals page in a new tab
