+44 (0)1373 710 610

support@motorsport-electronics.co.uk

+44 (0)1373 710 610

Block

Mazda MX-5 Mk2/Mk2.5 EGR blanking kit


WhatsApp

Mazda MX-5 Mk2/Mk2.5 EGR blanking kit

Mazda MX-5 Mk2/Mk2.5 EGR blanking kit

£20.00 (£16.67 ex VAT)

Two-piece blanking kit for MK2/2.5 MX5 inlet manifold.

In stock

Need anything else while you are here?

Exhuast Gas temperature sensor

Exhuast Gas Temperature sensor

An EGT sensor provides crucial data for optimizing engine performance, detecting malfunctions, prevents overheating when used with engine protection strategies.

TD04

Pre-Clocked TD04 Turbocharger Unit

Full turbocharger clocked for an MX5 engine bay with actuator mounted for easy installation.

Pierburg_Boost_Control_Solenoid_51729jpeg

Electronic Boost Control kit

No need for an old-school bleed screw! Let your new ECU take control of the boost with this electronic boost control solenoid and make use of boost-by-gear and rolling boost launch control.

Blanking off the Exhaust Gas Recirculation (EGR) system on your car is essential to get the ultimate power and efficiency for your engine, particularly in turbo applications. The EGR system forces used, hot, air into your intake, reducing power and efficiency. These systems can also be unreliable and expensive to replace with OEM parts.

Fitting this kit will not effect your MOT.

 

Additional information

Weight 1 kg
Dimensions 20 × 20 × 20 cm

What's in the box?

  • 2x blanking plates
  • Fittings

Related products

Interested in becoming a partner?

IGNITION-ONLY ECU's

Nodiz Gen-X

ME100 Gen-X

Support for 4 Cylinders

Supports up to a 4-cylinder engine with a wasted spark coil pack

R

YES

R

YES

Support for 6/8 Cylinders

Supports up to a 8-cylinder engine in wasted spark only

R

NO

R

YES

Mappable ignition

Live programmable ignition table for optimising ignition timing

R

YES

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines

R

YES

R

YES

Uses our free MEITE tuning software

Uses our advanced MEITE tuning software available from the website for Windows 7 or above

R

YES

R

YES

VVT Control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

NO

R

YES

PLUG-IN ECU's

ME221

ME442

Factory ECU replacement

Straight replacement for the factory ECU, plugs into the original engine harness

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

Flex Fuel

Can interpret a signal from a fuel sensor and alter the fuel delivery accordingly

R

YES

R

YES

Onboard MAP sensor

Manifold absolute pressure sensor fitted on the ECU

R

YES

R

YES

Onboard logging

SD Card slot used to record engine data used for diagnosis

R

NO

R

YES

Onboard wideband & sensor

Wideband integrated into the ECU. Sensor and cable included in the box

R

NO

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

Wire-In ECU's

ME221

ME360

ME442

4 Cylinders fully sequential

Supports up to a 4-cylinder engine with a wasted spark coil pack or coil-on-plug

R

YES

R

YES

R

YES

6 Cylinders fully sequential

Supports up to a 6-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

R

YES

R

YES

8 Cylinders fully sequential

Supports up to a 8-cylinder engine with a wasted spark coil pack or coil-on-plug

Q

NO

Q

NO

R

YES

Premade harnesses for different engines

Harness available to suit a range of engines rather than wiring up your own

R

YES

R

YES

R

YES

Coil on plug support

Suitable for individual coil-on-plug ignition or wasted spark ignition

R

YES

R

YES

R

YES

Boost Control

Increase and control boost levels using an external solenoid

R

YES

R

YES

R

YES

VVT control

Closed loop variable valve timing control, both fully variable eg ST170 or switched eg VTEC

R

YES

R

YES

R

YES

CAN bus

CAN output to send engine data to a digital display

R

YES

R

YES

R

YES

Knock control

Can interpret a signal from a knock sensor and retard timing accordingly for engine protection

R

YES

R

YES

R

YES

Onboard wideband lambda

Can interpret a signal from a LSU4.9 wideband lambda sensor to monitor air/fuel mixture for engine protection or calibration

R

YES

R

YES

R

YES

Onboard data logging

8GB SD card fitted to record engine data used for diagnostics or calibration review

R

YES

R

YES

R

YES

Drive-By-Wire Throttle

Support for electronic throttles (e-throttle/DBW)

R

NO

R

YES

R

YES

Exhaust Gas temp input

Can interpret a signal from an exhaust gas temperature sensor for engine protection and calibration

R

NO

R

YES

R

YES

GUIDE TO PLUG-IN ECUS

GUIDE TO ECU TYPES
GUIDE TO IGNITION ONLY ECUS
GUIDE TO ECU TYPES
 

GUIDE TO WIRE-IN ECUS

GUIDE TO ECU TYPES